heat-transfer coefficient)
직렬 고체층을 통과하는 열속 (heat flux)은 구동력, 즉 총괄 온도차 ΔT에 비례한다.
열 교환기에서 구동력은 Th-Tc로 택할 수 있다. 여기서 Th는 뜨거운 유체의 온도이고, Tc는 찬 유체의 온도이다.
Th-Tc항을 총괄 국부 온도차 (overall local temperature difference)ΔT이다.
그림 1에서와 같이
heattransfer coefficient값의 문제점.
Convection heattransfer coefficient가 일정하다고 생각했으나 실제실험에서는 조원들의 움직임이나 실험실 문의 여닫음에 의해서 Forced convection이 일어났을 가능성이 있다. Forced convection이 일어나지 않았다고 생각하더라도 Free convection시에 온도구배에 의해서 실제로 Convection he
2) 대류 열전달계수(coefficient of convection heattransfer)
매뉴얼에 주어진 h값의 표를 보간하여 이번 실험에서 사용할 대류 열전달계수(coefficient of convection heattransfer) h를 구하도록 하겠다. steady state에서의 온도는 다음과 같이 주어진다.
22.63°
41.3°
26.9°
위의 값들을 이용하여 매뉴얼에 주어진 표
HeatTransfer by Conduction)
(1) Fourier 법칙
푸리에의 법칙은 전도열전달 해석에 있어 기본을 구성하는 개념이다. 이 법칙은 기초적인 원리라기보다는 경험과 실험적 증거로부터 얻은 일반식이다. 전도에서 열흐름 방향은 등온선에 수직이다. 또한 전도 열유속은 온도가 낮은 방향으로 향하며 등온선에 수직
요 약
In present study, the effect of shapes of an air cooling module on the heattransfer performance for electronic packaging applications was numerically investigated. The types of three different fins considered in this study were pin-fin, plate-fin and ㄷ fin which have the different surface areas.
To improve cooling performance of the heat sinks for the LCD TV by adequate natural conve
1.실험목적
온도 측정 실험에서는 고체면의 열전달률(heattransfer rate)를 촉진시키기 위해 사용되는 방법 중의 하나인 fin을 사용한 열전달량을 살펴봄으로써 열전달 이론에 대한 실제적인 이해와 적용을 할 수 있도록 한다. 이를 위해 구리 fin과 온도에 따라 색상이 변하는 액정(TLC : Thermochromic Liquid Cry
(LED 패키지 내에서의 열전달)→(패키지에서 PCB로의 열전달)→(PCB에서 히트싱크로의 열전달)→(히트싱크 내에서의 열전달)→(히트싱크로 부터 외부 환경으로의 열전달)
-열전달(heattransfer)은 서로 다른 물질 간의 온도차에 의해 이루어짐
-열전달을 전도, 대류, 복사의 3가지 형
Acetone is the organic compound with the formula (CH3)2CO.
We have to use nearly pure acetone for organic solution.
Acetone is produced directly or indirectly from propylene.
After several processes.
Products we have are 40% of acetone and water solution.
How we get nearly pure acetone?
Factors to be considered:
Feasibility
Product value
Cost
Product quality
selectivity
Possible